TCI Tricon Bit IADC637 Petroleum Drill Bit

Product Description:Panda tricone bit used for geoloical prospecting,development of oil and gas,drilling water wells,blast holes and making holes for seismic prospecting,construction engineering.now there are eleven common types of tricone rock bits.Steel teeth series:IADC CODE:116,117,126,127,136,137,216,217,317,337,TCI series:

Featured Products

Product Description:

Panda tricone bit used for geoloical prospecting,development of oil and gas,drilling water wells,blast holes and making holes for seismic prospecting,construction engineering.now there are eleven common types of tricone rock bits.

Steel teeth series:IADC CODE:116,117,126,127,136,137,216,217,317,337,

TCI series:IADC CODE:417,437,447,517,527,537,547,617,627,637,647,737,837.

TCI tricone bit, tci roller Bits ,roller bit,steel tooth roller bit,TCI roller bit,TCI tricone bit

1.Sizes rang from 3 7/8" to 26"

2.Covers almost all IADC code. 3.Reliable quality and reasonable price


Normal IADC:

437Soft Formation TCI Tricone Bits:

The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, results in high bit penetration rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations.

517Medium Formation TCI Tricone Bits:

The 517 features aggressive chisel tungsten carbide inserts on the heel rows and inner rows. This design provides a fast drilling rate and added cutting structure durability in medium-to-medium hard formation. The HSN rubber O-ring provides adequate sealing for bearing durability.

637Hard Formation TCI Tricone Bits:

The 637 bits can be used to drill hard and abrasive formation. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-shaped inserts are used in all rows to provide cutter durability and long life.

617Medium-Hard Formation TCI Tricone Bits:

The 617 features robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-ring provides adequate sealing for bearing durability.


Specification:
IADCWOBRPMApplication
(KN/mm)(r/min)
111/114/1150.3-0.75200-80very soft formations with low compressive strength and high drill ability, like clay, mudstone, chalk
116/1170.35-0.8150-80very soft formations with low compressive strength and high drill ability, like clay, mudstone, chalk
1210.3-0.85200-80soft formations with low compressive strength and high drill ability, like mudstone, gypsum, salt, soft limestone
124/125 180-60
1310.3-0.95180-80soft to medium formations with low compressive strength, like medium, soft shake, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds
136/1370.35-1.0120-60
211/2410.3-0.95180-80medium formations with high compressive strength, like medium, soft shake, hard gypsum, medium soft limestone, medium soft sandstone, soft formation with harder interbeds.
216/2170.4-1.0100-60
246/2470.4-1.080-50medium hard formation with high compressive strength, like hard shale, limestone, sandstone, dolomite
3210.4-1.0150-70medium abrasive formations, like abrasive shale, limestone, sandstone, dolomite, hard gypsum, marble
3240.4-1.0120-50
437/447/4350.35-0.9240-70very soft formations with low compressive strength and high drill ability, like clay, mudstone, chalk, gypsum, salt, soft limestone
517/527/5150.35-1.0220-60soft formations with low compressive strength and high drill ability, like mudstone, gypsum, salt, soft limestone
537/547/5350.45-1.0220-50soft to medium formations with low compressive strength, like medium, soft shake, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds
617/6150.45-1.1200-50medium hard formation with high compressive strength, like hard shale, limestone, sandstone, dolomite
637/6350.5-1.1180-40hard formation with high compressive strength, like limestone, sandstone, dolomite, hard gypsum, marble
Note: Above limits of WOB and RRPM should not be used simultaneously

Diameter:
SizeSteel tooth bitTCI bit
inmmWeight(kgs)Weight(kgs)
3 7/898.456
4 5/8117.566.5
5 7/8149.21718
6152.41819.5
6 1/2165.11922
7 7/82002929.5
8 1/2215.93538
8 3/4222.23640
9 1/2241.35759
9 7/8250.85860
10 5/8269.96674
12 1/4311.185111
13 5/8346.1118120
14 3/4374.6140160
17 1/2444.5230255
20508428443
22558.8520560
26660.4720810

Different Type:
TCI Tricone Bit IADC637 Oil Drill Bit for Oil Drilling
Different Button Shapes:
TCI Tricone Bit IADC637 Oil Drill Bit for Oil Drilling
TCI Tricone Bit IADC637 Oil Drill Bit for Oil Drilling
TCI Tricone Bit IADC637 Oil Drill Bit for Oil Drilling
FAQ:

Q1: Can I have a sample for testing?

A:Samples are still to be paid but discounted price can be provided. 

Q2: Do you have the inspection procedures?

A:100% strict inspection and testing for every order before packing.

Q3: How can i get the after sale services?

A:Free replacement will provide once the problems casued by our product quality.

Q4: Can I have a visit to your factory before the order?

 

A: Sure, welcome, here is our address: Yantai, Shandong.
 

CONTACT:


 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours